GC107 MB Gel Strong Acid Cation Exchange Resin
GC107 MB Gel Strong Acid Cation Exchange Resin
Typical physical & Chemical characteristics
| Polymer Matrix Structure______________ | Styrene Crosslinked with DVB |
| Physical Form and Appearance__________ | Clear spherical beads |
| Whole Bead Count___________________ | 97% min. |
| Functional Groups____________________ | R-SO3¯ |
| Ionic Form ,as shipped________________ | Na |
| Total Exchange Capacity,Na+form,wet,volumetric________ | 1.8 meq/l min. |
| Moisture Retention, Na+ form___________ | 48-52% |
| Particle Size Range___________________ | 0.6-1.20mm |
| Less than 0.3mm | 1.0 %max |
| Swelling Na+→ H+___________________ | 10% max. |
| Ca2+→Na+__________________ | 5% max. |
| Shipping Weight (approx.)_____________ | 800 g/l |
| Specific Gravity, moist Na+ Form_______ | 1.29 |
| PH Range, Stability___________________ | 0 – 14 |
Suggested Operating Condition
| Maximum Temperature Na+ Form__________________H+ Form__________________ | 150°C (300oF) max.100°C (212oF) max. |
| Minimum Bed Depth_________________ | 0.6m(24inches) |
| Backwash Rate______________________ | 25 to 50% Bed Expansion |
| Regenerant Concentration Sodium Cycle_____________ | 4% to 6% NaCl |
| Regenerant Flow Rate ________________ | 4 to 12 BV/h (0.5 to 1.5gpm/cu/ft.) |
| Regenerant Contact Time _____________ | At least 30 minutes |
| Regenerant Level ____________________ | 112 -300g/L (4 to 10 pounds/ cu/ft.) |
| Displacement Rinse Rate ______________ | Same as Regenerant Flow Rate |
| Displacement Rinse Volume ___________ | 10 to 15 gallons/cu.ft. |
| Fast Rinse Rate ______________________ | Same as Service Flow Rate |
| Fast Rinse Volume ___________________ | 35 to 60 gallons/cu.ft. |
| Service Flow Rate ___________________ | 10-25m/h (2 to 10 gpm/cu/ft.) |
Write your message here and send it to us
