Wholesale Wholesale China Nitrate Selective Resin Companies Factory - Inert and Polymer beads – Dongli Manufacturer and Supplier

Wholesale China Nitrate Selective Resin Companies Factory - Inert and Polymer beads – Dongli

Product Detail

Product Tags

Feedback (2)

Our products are greatly acknowledged and reliable by users and may fulfill repeatedly shifting financial and social wants for Ion Exchange For Nitrate Removal , 1 Cubic Foot Di Resin , Ion Exchange Resin Formula , We'll do our greatest to fulfill your specifications and are sincerely searching ahead to developing mutual helpful small business marriage with you!

Wholesale China Nitrate Selective Resin Companies Factory - Inert and Polymer beads – Dongli Detail:

Inert Resin

Resins	Polymer Matrix Structure	Physical Form Appearance	Particle Size	Specific Gravity	Shipping Weight	Wear ability	Leachable
DL-1	Polypropylene	White Spherical Beads	02.5-4.0mm	0.9-0.95 mg/ml	300-350 g/L	98%	3%
DL-2	Polypropylene	White Spherical Beads	Φ1.3±0.1mmL1.4±0.1mm	0.88-0.92 mg/ml	500-570 g/L	98%	3%
STR	Polypropylene	White Spherical Beads	0.7-0.9mm	1.14-1.16 mg/ml	620-720 g/L	98%	3%

Inert and Polymer beads
inert resin4
inert resin3

This product has no active group and no ion exchange function. The relative density is generally controlled between the anion and cation resins to separate the anion and cation resins and avoid the cross contamination of the anion and cation resins during regeneration, so as to make the regeneration more complete.

Inert resin is mainly used for water treatment with high salt content; Large amount of water softening and dealkali treatment; Neutralization of waste acid and alkali; Treatment of electroplating wastewater containing copper and nickel; It can also be used for the recovery and treatment of waste liquid, the separation and purification of biochemical drugs. Many people are not clear about the function and use of inert resins. Let’s take a look at the following:

1. It plays the role of regenerant distribution during regeneration.

2. During operation, it can intercept the fine resin to avoid blocking the outlet hole or the gap of the filter cap.

3. Adjust the resin filling rate. The quality of floating bed is related to resin filling rate. The filling rate is too small to form a bed; If the filling rate is too high, the resin will be filled up after transformation and expansion, and the white ball can play a small role in regulating.

Precautions for Use of Inert Resin

This kind of resin is very stable under normal storage and use conditions. It is insoluble in water, acid, alkali and organic solvents, and does not react with them.

1. Handling, loading and unloading operations should be gentle, stable and regular, do not hit hard. If the ground is wet and slippery, pay attention to prevent slipping.
2. The storage temperature of this material should not be higher than 90 ℃, and the service temperature should be 180 ℃.
3. The storage temperature is above 0 ℃ in wet state. Please keep the package well sealed in case of water loss during storage; In case of dehydration, the dry resin should be soaked in ethanol for about 2 hours, cleaned with clean water, and then repackaged or used.
4. Prevent the ball from freezing and cracking in winter. If freezing is found, melt slowly at room temperature.
5. In the process of transportation or storage, it is strictly forbidden to stack with odors, toxic substances and strong oxidants.

Product detail pictures:

Related Product Guide:

Being supported by an advanced and specialist IT team, we could give technical support on pre-sales & after-sales services for Wholesale China Nitrate Selective Resin Companies Factory - Inert and Polymer beads – Dongli , The product will supply to all over the world, such as: Bangladesh, San Francisco, Argentina, Faced with the vitality of the global wave of economic integration, we've been confident with our high-quality items and sincerely service to all our customers and wish we can cooperate with you to create a brilliant future.

Anion Exchange Resin